| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Need table saw wrenches http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=8472 |
Page 1 of 1 |
| Author: | Terry Stowell [ Sat Sep 16, 2006 1:19 am ] |
| Post subject: | |
Hi all, I have a cheapie portable Shopcraft table saw. I need a wrench for the arbor so I can try out my nifty fret saw blade I got from Shane Neiffer. (After I get stabilizers) Anyone got an extra wrench? (stamped steel jobbie) |
|
| Author: | Brad Way [ Sat Sep 16, 2006 1:26 am ] |
| Post subject: | |
What size are you looking for? |
|
| Author: | Bobc [ Sat Sep 16, 2006 1:55 am ] |
| Post subject: | |
Terry I'm sure you can buy a box wrench that would fit. Sears, Harbor Freight, Home Depot etc. |
|
| Author: | Lillian F-W [ Sat Sep 16, 2006 2:07 am ] |
| Post subject: | |
Terry, I had to get one for my Grizzly, $2.00 plus shipping. They kind of hide them. You have to go to a saw page, then to the parts page and order it from there. |
|
| Author: | Terry Stowell [ Sat Sep 16, 2006 2:16 am ] |
| Post subject: | |
hi Brad, I think all I really need is a 1 1/4" open end THIN stamped steel wrench (for the inner nut closest to the motor). I use a 15/16" socket for the outer nut. I just went down to check sizes and got the blade off (successfully)blocking the blade with a chunk o'wood, but had problems before. |
|
| Author: | Terry Stowell [ Sat Sep 16, 2006 3:01 am ] |
| Post subject: | |
Hi Bob! I've got plenty of wrenches, but it needs to be thinner than my craftsman wrenches |
|
| Author: | Terry Stowell [ Sat Sep 16, 2006 3:04 am ] |
| Post subject: | |
[QUOTE=Aoibeann] Terry, I had to get one for my Grizzly, $2.00 plus shipping. They kind of hide them. You have to go to a saw page, then to the parts page and order it from there.[/QUOTE] Hi Lillian WEb or catalog? |
|
| Author: | Lillian F-W [ Sat Sep 16, 2006 3:21 am ] |
| Post subject: | |
Web. I just checked. The wrench has two cutouts, 1" and 7/8" closed. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|